|
** Preparing the Pieces
and Sewing the Block ** |
|
|
Start by cutting the Color 1 2-3/8" x 9-1/2" strip
into four 2-3/8" squares. Stack these and cut them once on the
diagonal to make eight half square triangles. Label these HST-A's. Now
cut the Color 1 2-3/4" x 5-1/2" strip into two
2-3/4" squares. Cut these in half on both diagonal s to make
eight quarter square triangles. Label these QST-A's...
|
|
|
Then cut the Color 2 2-1/2" x 10" strip into four
2-1/2" squares. Label these Square-A's. Cut the Color
2 1-1/2" x 6" strip into four 1-1/2" squares.
Label these Square-B's. Cut the Color 2 1-5/8" x
6-1/2" strip into four 1-5/8" squares. Label these Square-C's. Cut the Color 2 4-1/4" square in half on both
diagonals to make four quarter square triangles. Label these QST-B's...
|
|
|
Next speed piece the half squares, by stacking
the Color 1 and Color 2 1-7/8" x 15" strips, right
sides together and all edges aligned. On the back of the top strip,
lightly mark the 1-7/8" square lines and mark the diagonals in
the direction shown at left. Now sew 1/4" above and
below the marked diagonals, pivoting at the square lines. Now cut
apart ON the marked diagonals, and on the 1-7/8" square lines.
This will give you sixteen half squares. Press seam allowances towards
the darker fabric. These should measure 1-1/2" .
Label these your SMALL HSTS...
|
|
|
Speed piece the larger half square units in the same manner as
above using the Color 1 and Color 2 2" x 8"
strips. On the back of the top strip, lightly
mark the 2" square lines and mark the diagonals in the direction
shown at left. Now sew 1/4" above and below the
marked diagonals, pivoting at the square lines. Now cut apart ON the
marked diagonals, and on the 2" square lines. This will give you
eight half squares. Press seam allowances towards the darker fabric.
These should measure 1-5/8" . Label; these
your LARGE HSTS ...on to Page 2!
|
|
Aug 10 2005 Marcia Hohn |
|
Page 3 |
|
Traditional Block |
http://www.quilterscache.com |
|
|