|
Towers of Camelot - Page 2 |
|
|
Now place a Color 1 2-1/2" square right sides together and outside edges aligned with the Color 2 4-1/2" square. On the back of the small square draw in the diagonal and sew on this drawn line. Cut off the excess seam allowance and press the remainder towards the corner. Repeat this with another Color 2 square on the opposite corner, and then on the two adjacent corners. Trim to measure 4-1/2" if needed... |
|
|
Lay out all the block's units as shown at left. Sew three horizontal rows, pressing the top and bottom row seams to the outside and the middle row seam to the center. Sew the rows together, and it's done! |
|
|
Here are three blocks by four with sashings to float the stars. Coping strips are around it all, then a border of half squares! Happy Quilting! Marcia :o) |
|
** Supplies List ** |
 Color 1 |
Color 1 needs: one 4-7/8" x 9-3/4" strip AND one 2-1/2" x 10" strip AND one 5-1/4" square |
 Color 2 |
Color 2 needs: two 4-7/8" x 9-3/4" strips AND one 5-1/4" square AND one 4-1/2" square |
|
|
|
Traditional Block |
|
|
http://www.quilterscache.com |
Aug 27 2003 Marcia Hohn
