|
** Preparing the
Pieces and Sewing the Block ** |
|
|
Cut the Color 1 and Color
2 2-1/2" x 20" strips into eight 2-1/2" squares
of each... |
|
|
Next cut the Color 3
4-1/2" x 40-1/2" strip into nine 4-1/2" squares. Cut
the Color 3 2-1/2" x 18" strip into four 2-1/2"
x 4-1/2" rectangles... |
|
|
Then cut the Color 1 and Color
3 2-7/8" x 28-3/4" strips into ten 2-7/8"
squares of each. Pair these right sides together and all outer edges
aligned. On the back of the top square lightly draw in the diagonal,
then sew 1/4" away on each side of the drawn line. Cut
apart ON the drawn line and press seam allowances to the darker
side. These should measure 2-1/2" . Make twenty of these
half squares... |
|
|
Now using a 1/4" seam
allowance piece together the units shown at left from the half
squares we just made... |
|
|
Place a Color 1 2-1/2" square right sides together atop
the upper left corner of a Color 3 4-1/2" square,
with outer edges aligned. ( I show them staggered here just so you can see
what I mean) On the back of the top square, lightly draw the diagonal, then sew ON this
diagonal line. Cut off the excess seam allowance, and press the remainder towards the
outer triangle. Repeat this with a Color 2 square on the opposing
corner. Then repeat the same procedure with a Color 1 square on the
upper right corner and a Color 2 square on the lower left corner,
pressing the seams again towards the corners. Make four of these
units...on to Page 2! |
|
Oct 28 2007 Marcia Hohn |
|
|
|
Traditional Block |
http://www.quilterscache.com |
|
|