|
** Preparing the Pieces
and Sewing the Block **
|
|
|
Cut the Color 1 and Color 3 5-1/4" x 10-1/2" strips
into two 5-1/4" squares of each. Stack pairs of these. On the
back of the top squares lightly draw in the diagonal and then sew
1/4" sway on both sides of the drawn line. Using a ruler, cut
apart on the OPPOSITE diagonal, and then, on the drawn line. This will
give you pieced triangles. Sew them together as shown at left to make
four quarter squares for the block's sides. Trim to measure
4-1/2" if needed...
|
|
|
Cut the Color 3 2-1/2" x 10" strip into four
2-1/2" squares...
|
|
|
Next speed piece the half squares, by first
stacking the Color 2 and Color 3 2-7/8" x 20-1/8"
strips, right sides together and all edges aligned. On the back of the
top strip, lightly mark the 2-7/8" square lines and mark the
diagonals in the direction shown at left. Now sew a SCANT 1/4"
above and below the marked diagonals, pivoting at the square lines.
Now cut apart ON the marked diagonals, and on the 2-7/8" square
lines. Each strip set will give you fourteen half squares. Press seam
allowances towards the darker fabric. Repeat this with a Color 1 and
Color 3 2-7/8" x 17-1/4" strips to get twelve in that
color combination. Trim these back to measure 2-1/2" if needed...
|
|
|
Sew four pairs of Color 2/Color3 half squares
together as shown at bottom left. Stitch that unit to a Color 1/Color
3 quarter square. Make four units like this...
|
|
|
Now, using Color 1 and Color 2 half squares make up four of the units
shown at left...on to Page 2!
|
|
April 17 2006 Marcia Hohn
|
|
|
|
Original Block
|
http://www.quilterscache.com |
|
|