|
|
To make a side unit, place a Color 2 square
right sides together atop a Color 1 rectangle, with outer edges
aligned. On the back of the top square lightly mark the diagonal. Sew
on this diagonal marking. Cut off the excess seam allowance. Press the
remainder towards the corner. Repeat this with another Color 2 square
on the other end of the rectangle. Make two of these, and make two
more using Color 1 squares and Color 2 rectangles...
|
|
|
Now lay out all your units as shown at left. Sew three horizontal
rows, pressing the top and bottom row seams to the outside and the
center row seam to the middle. Sew the rows together to finish your
Blazing Arrows block! Congratulations on mastering another block!
|
|
Color 1 |
Color 1 needs: one
3-1/2" x 14" strip AND one 3-1/2" x 13" strip
AND one 7-1/4" square AND one 3-7/8" x 7-3/4"
strip |
|
Color 2 |
Color 2 needs: one
3-1/2" x 14" strip AND one 3-1/2" x 13" strip
AND one 7-1/4" square AND one 3-7/8" x 7-3/4"
strip |
|
Sept 12 2006 Marcia Hohn |
|
|
|
Traditional Block
|
http://www.quilterscache.com |
|
|