|
** Preparing the Pieces
and Sewing the Block ** |
|
|
Start by marking and cutting the Color 1
2" x 8" strip into four 2" squares...
|
|
|
Next mark and cut the Color 1 3-1/2"
x 24-1/2" strip into seven 3-1/2" squares...
|
|
|
Now mark and cut the Color 2 2" x
8" strip into four 2" squares...
|
|
|
Then mark and cut the Color 2
3-1/2" x 28" strip into eight 3-1/2" squares...
|
|
|
Now mark and cut the Color 2 3-1/2" x
19" strip into two 3-1/2" x 9-1/2" rectangles...
|
|
|
Place a small Color 1 square atop one corner of
a Color 2 3-1/2" square. Stitch on the diagonal through
both layers. Trim off the excess seam allowance, leaving 1/4"
beyond stitching. Press small triangle out towards corner. Make
four units like this...
|
|
|
Repeat this same type of procedure using a Color 1 3-1/2"
square and a small Color 2 square, this time sewing the small square
to the top AND bottom of one side of the larger square. Make two units
like this...
|
|
|
Speed piece the half squares by stacking the
Color 1 and Color 2 3-7/8" x 7-3/4" strips right sides
together and all edges aligned. On the back of the top strip lightly
draw in the 3-7/8" square line, then draw in the diagonals in the
direction shown at left. Now sew 1/4" above and below the
marked diagonals, pivoting at the square line. Cut apart on the square
line, and on the marked diagonal lines between the rows of stitching.
This will give you four half squares. Press seams to the darker side.
These should measure 3-1/2" square... on to Page 2!
|
|
August 6 2002 Marcia Hohn |
|
|
|
Traditional Block |
http://www.quilterscache.com |
|
|