| 
          
             ** Preparing the Pieces
            and Sewing the Block **   | 
         
       
      
        
           | 
          
             
			   | 
          
          Start by marking and cutting the Color 1  5" x 7" strip
          into four 2-1/2" x 3-1/2" rectangles. Then mark and cut the
          Color 1  3" x 6" strip into eight 1-1/2"
          squares...
           | 
         
       
      
        
           | 
          
             
			   | 
          
          Next mark and cut the Color 2  2-1/2" x 12-1/2" strip
          into five 2-1/2" squares
           | 
         
       
      
        
           | 
          
             
			   | 
          
          Now mark and cut the Color 3  3" x 15" strip into
          twenty 1-1/2" squares...
           | 
         
       
      
        
           | 
          
             
			   | 
          
          Next speed piece the half squares, by stacking
          the Color 1 and Color 3  1-7/8" x 7-1/2" strips, right
          sides together and all edges aligned. On the back of the top strip,
          lightly mark the 1-7/8" square lines and mark the diagonals in
          the direction shown at left. Now sew 1/4" above and
          below the marked diagonals, pivoting at the square lines. Now cut
          apart ON the marked diagonals, and on the 1-7/8" square lines.
          This will give you eight half squares. Press seam allowances towards
          the darker fabric. These should measure 1-1/2" .
          Repeat this with a Color 2/Color 3 strip set to get eight more half
          squares in that color arrangement...
           | 
         
       
      
        
           | 
          
              
  | 
          
          To make the side rectangle units, place
          a Color 3  1-1/2" square right sides together atop the upper
          left corner of  a Color 1 rectangle with outside edges aligned. I
          show them staggered a bit here; yours shouldn't be.  Mark the
          diagonal as shown, and sew through all layers on the marked line. Trim
          off excess seam allowance. Press remainder towards center. Do the same
          on the opposing corners, and then on the two adjacent corners. Make
          four units like this...
           ...on 
			to
          Page 2!            or 
          Page 3
           
           | 
         
       
      
        
           | 
          
             
			  April 15 2003  Marcia Hohn  | 
          
              
  | 
          
             http://www.quilterscache.com  | 
         
        
          | 
             Original  Block  | 
         
       
     |