|
** Preparing the Pieces
and Sewing the Block ** |
|
|
We'll start by speed piecing the half squares. Stacking the
Color 2 and Color 3 4-7/8" x 9-3/4" strips, right sides together
and all edges aligned. On the back of the top strip, lightly mark the
4-7/8" square line and mark the diagonals in the direction shown at left.
Now sew 1/4" above and below the marked diagonals (shown in red at left)
pivoting at the square lines. Now cut apart on the marked diagonals,
and on the 4-7/8" square line. This will give you four half squares.
Press seam allowances towards the darker fabric. These should measure
4-1/2" ... |
|
|
Sew the Color 1 and Color 3 2-1/2" x 20" strips right
sides together along a long edge using a 1/4" seam. Press seam
to darker side, and cut into eight 2-1/2" units |
|
|
Next sew the Color 2 and Color 3 2-1/2" x 5" strips
right sides together along one long edge. Press to darker side,
and cut into two 2-1/2" units... |
|
|
Now sew the four patch units shown at left using the
pieced units we just made. Three of these four patches
will use Color 1/Color 3 units, and two will use Color 2/Color 3
units. These should measure 4-1/2"...on to Page
2! |
|
Nov
19 2013Marcia Hohn |
|
|
|
Traditional Block
|
http://www.quilterscache.com |
|
|